Review
Frient Intelligent Heat Alarm
Frequently Asked Questions:
Can you link these heat alarm sensors together?
No, this is not possible
How much DB noise does this detector give?
We measured 85db.
What are the dimensions of this detector?
The dimensions are 65x65x40mm
What protocol does he work with?
With the Zigbee protocol.
How can I reset the sensor?
You can reset it by holding the button on the front for 10 seconds.
How can I test the sensor?
You can hold the button on the front for 6.5 seconds. There will be 2 groups of 3 beeps.
At what temperature does the alarm go off?
The alarm goes off at 58 degrees.
What do the different LED colors mean?
You can hold the button on the front for 6.5 seconds. There will be 2 groups of 3 beeps. A signal will also be sent to your controller.
| Status | LED | Geluid |
|---|---|---|
| Searching gateway | Flashing red (up to 15 min.) | x |
| Low battery | LED flashes every 45 seconds | Repeatedly |
| Normal mode | Blinking every 45 seconds | 3x beeps |
| Alarm mode | Continuous flashing | loud sound |
How long does this sensor last?
It is recommended to replace this sensor after 10 years because the sensor then deteriorates and is therefore less able to detect heat. Status LED Sound